True Mods 6-Gang 12V Rocker Switch Box [40 Amp Max.] [12 AWG Wires][12 Volt DC] SPST On/Off Rocker Toggle Switch Panel Box for Auto Automotive Lights Car Marine Boat Truck Vehicles & More

I needed to hook up some additional stuff for my tractor and the existing accessory connections did not fit my case, so I got this little box instead. For the price, it's fantastic. The case is very-well made and the buttons feel great. I've seen some reviewers having issues with the buttons after a while, so I hope that won't be the case for me, but they're pretty generic and easy to replace if that happens, so I'm not too concerned. For my case, I might add a relay, so that this thing only turns on when ignition switch is on, since at the moment I have to remember to turn all the switches off. By the way, I double-checked and there's no current draw when all switches are off (someone mentioned that they saw current draw when things are off... I didn't see any).

Great Product. Switches work fine and everything is labeled and easy to decipher. works with my cb and warning lights without issue. mount is ok and everything was easy to install..

The switchbox seems to work as it should. I took mine apart and made all the switch wires come out the same side and the power wires going out the other. I believe it looks cleaner that way. I also put some 3m tape in the rail where the nut goes so it can't fall out when I remove the box. Because that happened and I nearly never found the nut again.. I saw a video review about how it draws power even when off.. there's no way for that to even happen so idk what that was about. I installed one of these in my dad's car about 3 years ago and its still going strong. So I have no doubts this one will do good too.

This thing works very well, so when I purchased it, I wasn’t sure if the mount could go either down or up, yes it can, you can take the mount off and it can either be facedown, or face up, it works very well, haven’t had a single problem with it. I love the installed fuses, as well as the very simple wiring setup, I would still recommend installing a inline fuse from the power to the battery, as well as using two separate ground points instead of putting both grounds in the same spot, absolutely love this!!! Installed very clean in my EK civic sedan.

I purchased this switch box as an alternative to cutting/drilling into my dash. It is well constructed, with 6 on/off switches. I will be controlling a Bussman under-hood breaker panel with 5 low voltage fuse protected circuits and 5 relay controlled circuits. This box will work perfect for the relay controlled accessories. However, if you look at the stock photo, there are 2 large 12 gauge power wires powering 2 separate fuse protected sets of 3 switches each. I chose to replace these 2 large feeds with a smaller 14 gauge single power feed, leaving sufficient length to reach the fuse box and eliminating 1 additional butt connector. I will replace one switch "F" to a momentary contact switch later, available on Amazon. 4th photo is the power ground run thru 1/4" braided loom and the switches fed thru the 3/8" loom.

So I have quite the LED display on my 2019 Toyota Camry. Over the span of having owned it so far I’ve searched for the best and easiest way to wire up all the leds. Being a complete beginner and new to electrical work I was always puzzled or had second doubts about making my final choices as to what products I’d end up using. I’ve tried all different switches and what not and as soon as I found this.... everything was such a breeze. I had taken all Pre-existing Switches and wiring I had and re-did everything and cleaned up the wiring and this panel hasn’t let me down yet. And just to touch base on how easy installation is... I was basically a grade A noobtucus when it came to automotive anything so that includes trim removal, running wire, organizing wire, where to hook up my grounds.... anything auto electrical period, I was a noob. The very definition of a dummy when it came to obtaining a clue or some sense of direction in hopes of getting my project to shine bright. This panel was what had me originally open my eyes and realize what was what and helped breakdown the many different functions that these things offer. And 80 amps of juice.... I feel as if I can still power a portable fridge in my car if I wanted to without messing up my cars battery! If you’re contemplating if this is worth the buy, and know your way around with electronics... then this is the best bang for your buck IMO.

I bought this to add accessories to my Bad Boy Buggy and it works as described. I love the size and how easy it was to install. The wires are labeled clearly and enjoyed the ease it provided with installation. Great product and I would not hesitate to purchase again.

I WAS DEBATING ABOUT BUILDING MY OWN CONTROL BOX, UNTIL I SEEN THIS CONTROL BOX ON AMAZON. NEEDLESS TO SAY, I HAD ALREADY BOUGHT TOGGLE SWITCHES, RELAYS, AND ETC. FOR BUILDING, MY OWN CONTROL BOX. (*OVER SIGHT*) PRIOR TO MORE RESEARCH. OH WELL, I PURCHASED THIS CONTROL BOX AND SO GLAD I DID. I HAVE A 2016, 2500HD CHEVY 4X4 CREW CAB. I MOUNTED THIS BOX, JUST UNDER THE STEERING COLUMN. THIS LOCATION WORKED BEST FOR ME AS (*NOT BEING IN THE WAY*) OF OTHER WORKING EQUIPMENT. I RAN ALL WIRING UNDER THE MOUNTING AREA OF CONTROL BOX AND IT WORKED JUST LOVELY FOR ME. I FUSED EACH WIRE, COMING OUT OF CONTROL BOX, TO MY OTHER ELECTRICAL UNITS, THUS THE BOX IS PROTECTED FROM POSSIBLE WIRING ISSUES. I NEVER USED ANY RELAYS, IN CONSTRUCTION OF MY BOX WIRING. THE UNIT POWER WIRE (*AT THE UNIT*) IS ALSO FUSED. COMMONLY DOUBLE FUSED FOR PROTECTION. WIRING HARNESS'S CAN BE VERY EXPENSIVE TO REPLACE, FUSE'S ARE CHEAPER. SOME OF MY UNITS ARE WIRED USING (*ONE WAY DIODE'S*) THIS WAY, ("SAME LIGHTS") CAN FUNCTION IN MULTIPLE WAYS. I HIGHLY RECOMMEND THIS BOX, FOR PEOPLE LIKE MYSELF, THAT WANTS SMALL AREA MOUNTING, FOR BIG RESULTS. IT'S VERY WELL CONSTRUCTED AND HEAVY IN A WAY. WHEN YOU HOLD THIS BOX BY HAND, YOU'LL KNOW IT'S WORTH IT'S WEIGHT IN GOLD. HAPPY MOTORING.

Excellent switch panel, will buy again

Quality product

Works great , we'll made easy to hook up

I wired mine inside a compartment. Runs my boat lights, make sure you fuse your runs. Good luck on your project.

During install while attempting to get lights working, I found out that 1 out of the 6 switches isn't working properly. Some times it will turn on but if you tap or touch the switch lightly it will turn off and touch it again and it lights back up. So far the other 5 switches are working.