Large Tilt Mount

This is a quality product, especially at this price point. I like that an optional extension rail is provided to allow spanning across 24" stud intervals - but this same extension is valuable to provide lots of extra flexibility in centering the TV on your wall even if the stud placement is nowhere near centered on the wall. The tilt mechanism is basic but functions well within a reasonable range of motion and the TV is easy to attach to the bracket. I had to shorten the two TV rails that attach to my LG TV as the back of my particular TV model is not flat at the bottom, but "flares out" to a wider base. That was easily done with a hacksaw (removed about 2" of each rail before bolting to back of TV VESA mount). The directions were reasonably well-written and easy to follow. A cardboard mounting template is also provided, along with a set of adjustment screws near the top to level out the TV left-to-right (this helps if you find your mounting bracket is not perfectly level across the wall after you bolt it in place). If you are handy with tools and doing measurements to lay things out, this is an easy install. If that is not your skillset, it may be worthwhile to have a friend who is knowledgeable help you out.

We decided to wall mount all three of our flat screens for convenience. The other two TVs are newer and took the "X" style wall mount, but this old TV has a really big, rectangular mounting pattern compared to those newer models, so the new wall mounts that fit the newer TVs just don't adjust big enough for our old dinosaur. Found this product, Everstone Adjustable Tilt TV Wall Mount Bracket for Most 32-80 Inch LEDs, which was a great price. Got it, mounted the hardware and got the TV up within ten minutes. Very easy once you have figured out where your studs are in the wall. Just pay attention to your instructions. The brackets that attach the TV to the wall mount go one way only. They are labeled, so just look for it so you don't mount those upside down. Someone in our household doesn't read directions and put those on upside down the first time. But it's up now, holds really tight, swivels up or down and is just what we needed to save space. This is a 40" TV, weighs 20-30 pounds. This mount does the job. We recommend!

I love everything about this wall mount, including the price. Bought this for a 75" TV and was not disappointed. It is incredibly sturdy. Came with a set a large lag bolts that should be capable of holding well over 100 pounds. You also get an extension piece in case you live in an older house where the wall studs are more than 16" apart. The included HDMI cable was a nice touch as is the include level. You get a number of different size bolt, one of which is sure to fit the back of your particular TV for attaching the mount bars. I found the bolts either too long or too short, so I used the longer ones and had to use the included spacers which worked out just fine. Once the mount is attached to the wall and the mount bars are attached to your TV, just lift and clip. Very simple. Overall we were extremely happy with this purchase and even ordered a second one for my son's room. At this price you can absolutely not go wrong.

Having decided I didn't want to pay someone to mount my 3 flat screens in my house I decided to try and do it myself for the 1st time. The price was just right on this kit for mounting all 3 of my tvs. 3 kits for less than Best Buys price to mount 1. To say I had a little trepidation is an understatement, but after watching a very helpful video and getting all the correct tools in place. I mounted all 3 tvs in a weekend. My tvs range in sizes from 48" to 58" and quite a difference in weight. Im not sure home much my old Phillips 52" weighed but it must have been a good 45-50 pounds. The 42" and 58" are newer and dont nearly weigh as much. Installation was pretty straight forward, with the biggest challenge being finding the studs. Having been unfamiliar with a stud finder I purchased one and after a few gos I was able to find them more easily that I thought I would. Except in my daughters room which is an addition to the garage so finding the studs with those thin walls was quite tricky. But once found, the rest of the set up was easy, mark the studs with my trusty pencil. Hang the template, make sure its level. The kit comes with a level that works just fine. Then mark the holes in all 4 spots that you need to mount the bracket to the wall. Once I marked them I used my Phillips head screwdriver to dent the drywall for my starter hole for my drill. I would recommend a cordless nut-driver if you have one. Keeps the big wood screws from really burying into the drywall as the torque kicks in. The bracket mounting to the back of the TV was straight forward and took about 5 mins to do, just pick out the right size screw, washer and spacer and your all set. Once the brackets are on, pick the tv up and put it on the wall mount. I installed all 3 tvs by myself and it was really easy to pick them up and slip them onto the top of the mount and then slide the bottom half on and hear the click. Slide left and right to move the tv in place, tilt up in down to your preference and WALLA! its mounted. I didn't need the wall mount extension as my studs were 16" apart. I have to believe anyone who rated this really low must be a perfectionist or just got some bad parts. Im not an audiophile or building a top notch home entertainment system. I just wanted my TVs off the stands since moving into this new house. Im very happy with the quality and ease of which to install these. Having this been my 1st time, it took me about an hour to do my 1st tv and then half as much for my 2nd one and then maybe 10-20 minutes for my last one. The instructions are not very good, so watch the video thats with the mount, if not just go to YouTube and type in your type of tv and mounting to the wall, you will find someone with instructions. I would have given 5/5 if the instructions were better, so 4/5 isn't too bad. ....Good luck!

I read a few reviews and it seems that this unit could do the job and not break the bank - it did work out great! I bought 2 units on one I installed a 50 pound TV and that was no problem as the unit is rated to like 120 pounds or so. The other unit was for a new 65" TV which probably didn't weigh 30 pounds. I installed these units in probably less than 30 minutes each and that includes the time to put a couple things together and measure the height requirements and center for install. Highly recommended...I was so impressed that it even came with a good workable level to use so all I needed to install was a pencil, drill and impact driver to put the large screws in the 2X 4's (which one could do with a socket and a ratchet). Highly recommend this product and this is from someone who reads reviews before making a purchase but rarely takes the time to provide feedback.

Very easy to install. The hardware that came with the TV wall mount was very appropriate to the mount itself. Sometimes when hardware is provided for TV mounts they don’t fit correctly or they may not secure it firmly. The instructions were very helpful in the type of TV screw holes you may have and the appropriate bolts to use to secure your TV to the rack. As most of you know it’s best to use a stud finder to know where you can use the mounting screws to secure the mounting frame so that it is strong enough to hold your TV. When using the mounting screws, make sure you drill a pilot hole first into the wall and stud so that when you use your drill to screw in the mounting screws it will go in a little easy but yet grip the wood keeping the mount tight to the wall. The quick release clips in the back make it easy to release the TV. Overall I love it.

When I first started looking at mounts for my 70 pound, 65 inch TV, I got a little sticker shocked. I was not ready to spend $100+ to mount my TV. The manufacturer recommended mount actually ran higher than that, close to $150. When I found this mount, I was a little skeptical. How can something so cheap work as well as the $150 recommended mount? By God, was I wrong. If you have a bunch of money to waste, then go ahead and buy the more expensive ones. If you're looking for a great mount that is easy to assemble and doesn't cost a fortune, head this way. We actually had to mount this thing twice (because I tried to go too quick and the thing was no where near level) but we were still done within an hour! All jokes aside, this mount is extremely high quality and impressively affordable. It does not pivot or extend, but it does tilt up and down. I would recommend to anyone looking to mount their TV if you aren't looking for a bunch of bells and whistles.

I've probably put up about 20 TV brackets over the years and i"ll say this is now my go to bracket. I originally bought this because it was cheap and I wanted the TV to sit tighter to the wall vs the older bulky types that are complete overkill for the newer TVs that are prob half the weight or older versions. It was sturdy and easy to insall (55" Samsung TV), I recently (12 months later) bought another TV/Bracket and am happy to report that its been improved, theyve added spring loaded clips to replace the thumb screws (which was a hassle to reach up behind TV to turn) that lock the TV in place. Also the strings that unlock the clips have hooks so they are easy to hide behind the TV vs the older version that had rings and I just threw them up behind the TV a few times til they stayed.

ممتاز وسهل التركيب انا ركبته بنفسى وخامه ممتازه ومتينه

I Never expected this to be that great for the price. It even came with a level in it to balance things out. I can’t lie, I sat in my living room trying real hard to think of something negative but there’s nothing. It’s fully adjustable, built like a tank and super easy to install. Also, did I mention it’s dirt cheap ?

المنتج غير المطلوب المطلوب حامل تليفزيون يسمح بالاماله من ايفراستون و الذي حضر حامل ثابت ماركه تايجر و ثابت ولا يتحرك بالاماله المطلوبه مطلوب تغيره او ارجاعه

For the price i thought it couldnt be that great, but the reviews kept saying otherwise. After opening it and installing it i am very impressed with what you get. Lots of different hardware for all makes of tvs and the metal wasn't flimsy at all. I installed this on a piece of 3/8 plywood cut 2 inches larger in diameter then the mount with the attachment on each for more rigidity when mounting bracket. As you can see it holds up the tv nicely (70'' Sony) and the tilt range is perfect for what i was looking for. Definitely recommend if you want a setup like mine.

We bought this tv wall mount I'm usually sceptical about ordering cheaper items as quality is not as good usually, but it said it could hold the weight capacity of our flatscreen so I took the chance, and have to say it was easy to install and is extremely sturdy definitely worth the money. Very happy with our purchase, and would definitely recommend.