BohningJig

Well after borrowing my brother's Fletching jig enough times and some of those times I had to wait for him to get home to use it. I decided it was finally time to get my own. He has a single vane Fletching jig and it was nice but it was hard to set up. I bought a boning single vane Fletching jig and I had problems with it holding the arrow steady in the Nock point. So I sent it back and bought the Bohning tower jig and I couldn't be more happier. I bought the complete kit and to my surprise it came with every arrow diameter you could possibly use on this jig. And what I didn't know it came with 9 clamp release tapes that you put on the arrow vane clamps so the glue don't stuck to your clamps. I would have known that this kit came with nine of them I would I have ordered more separately. I bought a 20 pack and I have enough clamp tapes to last me a lifetime. This jig has made life easier and if you use Arrow wraps all you have to do is peel the wrap off if you were to happen to damage a vane and everything comes off and one swoop. I used the boning Fletch Tite Platinum and it works great with a quick cure time of 15 seconds and I released a jig and take the arrow up and I've had no problems yet. With this kit you can do right or left helical or straight veins and you know all your veins are in the correct spot every time. I highly recommend this jig it has made Fletching arrows fun and easy. I'd recommend it for the new and experienced Archer.

Easy to use. My tip is to clean it after every arrow to keep vane slots from sticking . Works great I love it

The tower easily sets up and is ready to use. Vanes are easily placed with accurate positioning. I was able to vane 6 arrows in less than 20 minutes without any prior experience. Great tool for both the veteran and the inexperienced.

Returned in transit, had to re-order again This is happening with a lot of items on Amazon for me at least prime it’s not useful. but this product is a very good product. I use mine a lot.

I've been overpaying for archery shops to fletch my arrows for far too long. I've been looking into fletching my own arrows for a while and settled on the Triple Tower Jig. Even though the directions were small and not super detailed it was really easy to put together and only took a few minutes. I fletched 9 arrows the first night and it only took me about 20 minutes. That was with me working pretty slow. I messed up one time. I love that it does all 3 vanes at once but if you rush it is possible to not have them align perfectly. I went slow from that point on and it didn't happen again. I would recommend purchasing this product.

This is a good product with caveats. If you want to build a lot of arrows, this product is not the right buy for you. I find that I have to be very particular when placing the vanes into the slots, otherwise they become offset. I found that the vane glue, without fail and regardless of the quantity placed on the vane, seeps into the slots and needs to be cleaned out virtually every time. When you are talking $10-$25 / arrow, you want to be sure that you are getting your vane placements right to ensure correct flight. This product is not going to produce the type of quality needed. But again, for repairs or replacement of vanes, this product works great.

My only regret about this purchase is that I should have bought it sooner. I've been hand-fletching arrows for too long and wasted so much time! This jig is super easy to use and FAST! Even the assembly was fairly easy, although I would recommend watching one of the many Youtube videos, rather than trying to follow the instructions and diagrams. The videos are much easier. I set this up and fletched a full dozen arrows very quickly. They look great! For the few reviews that complain about inconsistent placement of the vane, the key is to push the vane all the way down in the holding arm. When the arms are closed, you can see the fletching placement on the back. The bottom of the vane should fill the bottom of the slit. Depending on how big your vane is, it might not reach all the way to the top. If there is still space in the slit (on the bottom), your fletching is badly placed. If your glue is not super-fast, you can wiggle the vane down with the arms closed. Otherwise, open the arms and push the vane down to the bottom of the slit. As long as you always have the vane sitting on the BOTTOM, your fletching will be straight and even every time. If you want to fletch further from the nock, you should use the spacer bars that Bohning provides.

It costs me a buck per fletching plus time and gas to get my arrows fletched then I'm on the bow shops schedule. During season I can't be waiting like that. This was a great buy. Easy to put together and easy to work.

sin duda una de las mejores compras que he realizado me super agiliza la velocidad de armar flechas

Easy to use , consistent results and fast fletching, perfect! makes sure the arrows fly the same very happy with purchase :)

Product new as described. Makes fletching arrows simple and easy. Wouldn't hesitate to buy.

Bueno y práctico para tirador amateur, con aditamentos para todo calibre de flechas.

Great 3x fletching tool, works easily and consistently, tho care has to be taken to make sure all fletchings are correctly position. It could do with a little more detailed instructions on how to adjust for different shaft sizes, but overall I am very happy with the results