Original Steel Reinforced Epoxy Syringe, High Strength, 2 Pack, Dark Grey, 50165-2

Always been a fan of J-B Weld. Others seem just as good most of the time, but have stuck with what I know. I like the syringe applicator and much less messy than the squeeze tubes. If mixed good and surface prepared and cleaned this always seems to hold and work long term. Easy to use and durable. For the money it isn't the cheapest, but you always know what you are getting.

I like keeping some of these in my tool box for unique emergencies. Easy to use in a pinch. Durable and gets the job done!

Great product. Easy to use and reuse multiple times. When it hardens, it really is tough. Perfect amount of time to use and adjust before it cures. Well worth the price.

Let me preface: I work as a QA/QM/QC engineer with hard state electronics, I am self-taught in how to do electrical work (house wiring) and also self taught in the use of machine shop equipment (drill presses, lathes, so on and so on). Part of my work is also with "potting" compounds, that is, encapsulating the industrial electronic piece in various lacquers, fiber glass resins, high thermal condustivity and high dielectric strength epoxies. Suffice to say, I know what I am talking about. AB is on par with these industrial grade "potting" compounds. There is a faucet in my house that has that stupid design where the handle is on a stem that is held in place with a set screw (a screw with no head). After repeated usage it came undone. The valve still works but the handle did not stay in place. So I used this AB product to back fill the orifice in to which the valve stem was inserted and then cranked a flat head screw in to the port for which the set screw was intended. It's been in service since then with ZERO FAILURE for several years, and the hand is solidly held in place, there is no slop in the handle's movement. It's "welded" in place by the back fill with the JB weld and the screw which held it in place until the JB weld putty set. There is another faucet which was a much more complicated fix, so I won't describe that one. All one needs to know is with JB weld and ingenuity I made the handle effectively shatter proof, you can slap the handle down with a thunk and it will not come undone.

Great for anything you need it for holds up well.

Wish the package would have a perforated back flap, so you can store the unused portion in its own container without getting goop everywhere.

JB weld is the best stuff on the planet.

I used this to fix a kitchen sink faucet handle, the gear stripped and would free spin. The instructions were clear, I used the cardboard Amazon box to mix the 2 parts, applied it to the gear sticking out of the sink, stuck the handle back on it, and left it overnight. By morning the sink handle worked like new! It's been about a week since applying it and its still holding strong. The shaft sticking out of the sink was metal, and the gear inside the handle was plastic and striped smooth. I was worried it wasn't going to bond well but a week later and its still going. Great product IMO.

This product is very good. It cures very well and it sets properly hard. Good for industrial use. I used it in my car. For a coolant tank crack but unfortunately didn't work well for me, but the product is good.

It’s the best cures fast

This epoxy is perfect. I use it to weld pinbacks to enamel pins. It's so sturdy. Even with the expensive shipping to the Netherlands worth every penny.

Fyllde sim funktion

It’s jb weld. It works