BOW Products 46" XT XTENDER Fence - T-Track Table Saw Fence System with Multiple T-Slots for Woodworking Accessories - Fits Portable, Cabinet, and Bandsaws - XT546 (Fence Only)

Great product, quality made. Bought the full set up and couldn't be happier. Its my first table saw but do have lots of plans and the entire systems has tons of safety features and customization options. Very stable, great value, and easy to use.

I hesitated buying the 46” extender fence because of the price and usefulness of this product. I have a small Dewalt table top primarily because I like to move the saw between work benches. This has been an unbelievably useful purchase. It adds a great deal of safety when ripping medium and long boards; paired with a feather board to hold the board down on the outboard side the cut is very secure and accurate. The extender fence is very easy to detach and reattach from the fence. I would estimate it takes 30 seconds. Finally, it’s a quality product. Very sturdy and true. It was definitely a good investment for me.

I put one of these along with the fence clamps, feed supports, and feather boards on my DeWalt contractor saw. From the first cut, the benefits were clear in terms of safety and ease of use. Feeding larger work pieces into the saw became simple and safe from the start. All the standard cautions about table saws apply but you know that already. The components are very sturdy and well-made. The instructions are clear and installation is fast and very easy. I can move mine from saw to saw with very little effort. It also works on my band saw which is a huge plus. Fully equipped the Bow fence is about $300 which for me was well worth the cost.

I wanted to review the fence of Bow Products. I just bought the fence and 2 clamps. Fast Shipping, I supposed to get it on Saturday, I got it a day earlier, on Friday. The cardboard is super heavy and stiff. From the moment you take it into your hands, you see that the Bow Products Company did not cut any corners. Looks like they want to make sure that there is absolutely zero chance for any damage or bend of the fence in the shipping. Just the packaging itself is probably worth $10. The fence is heavy and solid 1 inch thick aluminum. Quality! You are going to see it right away. I have the 10 inch metabo hpt jobsite saw ($450). The saw is stationed in the basement of my house, I have all the space I need. I am using 8 foot long outfeed table and I am currently building 4 foot infeed table. Wait! You do need to buy this fence - you have the support tables. Wrong! I also have 12 inch single bevel meter saw and circular saw with the aluminum guide for longer cuts. I am not planning to spend hundreds of dollars for the track saw - I like using my table saw. I want to be able to cut entire sheet of plywood by myself on the table saw. Installation took 5 min. Position the fence accordingly and use the clamps. I did have a little problem with my original fence. The "low fence" or "flip support" part of my original fence for wider pieces (mostly plywood) was getting in the way of the clamps and if I wanted to cut something wide, I would have to take the Bow Fence off , flip the support, reattach Bow fence - too much hassle. I am lazy, I do not want to disconnect and then connect - the Bow Fence will stay in place on my saw! I permanently disconnected flip support and I cut wide piece of 3/4 plywood, which I can slide underneath from either side of the fence for support for wider pieces. The original fence is 23 inches long. The Bow Fence is 46, so I am doubling the "travel time" of the workpiece against the fence. I am using it mostly for infeed. (21 inches on the infeed and 2 on the outfeed). In the future, I might get some upgrades for my table saw like zero clearance insert, feather boards, etc. My argument is this: "This fence should be Number 1 upgrade for any small/compact/contractor/jobsite table saw". This upgrade should be done before any other upgrades are even considered. The way that I am using table saw is probably completely different that an average person. Because I am absolutely terrified of it, I like to stand far away from the saw. I use two long push sticks (each one is about 42 inches long), plus I stand at 6'1'', so I have a little longer reach. This fence fits the bill perfectly for "far away" and accurate work. This is one of those GENIUS ideas ("FENCE IN YOUR FACE") that ALMOST no one thought about it. Get it, you will absolutely love it!

The product was shipped excellently. The packaging box was thick enough to protect the item from damage. The item arrived in excellent condition. Once installed, it works perfectly. I recommend this to anyone who is still hesitant to buy it.

Works well on my little bosch tablesaw. Wished I would have bought on sooner. No complaints

Great improvement to my factory table saw fence. Far better support of long pieces at both infeed and outfeed. Easily clamps to the old fence.

High quality, stable in use and fit all my worksite saws.

Excelente upgrade de tu sierra portatil y de mesa.

This is a well made item. Sold and sturdy. This works well with my Dewalt table saw. It really does make the difference having the support especially if you are by yourself.

I should have bought this years ago. I also have the bow products like CT2 Track clamps, Feather DUO FP3 and Fence PRO FP4. As seen in pictures they work great. Good safety and great service when I had a question about the Fence. Fully recommend these products for safety and use.

Super sturdy, very functional. I have a 1956 dewalt/atlas table saw and the old fence was always strait but lacked all the options this upgrade offers. I did buy the fence thinking the clamps ect would come with it but after re-reading the profile I realized they didnt. I had to order those separately but well worth ever penny

Solid heavy duty product!