AMVR Upgraded Controller Grips Cover Compatible with Meta/Oculus Quest 3s/Quest 3 Accessories, with Battery Opening Cover and Knuckle Straps Protector(Not for Charging Dock)

I really love these. So the clever way they give you access to the battery compartment I would argue isn't 100% perfect. Its fine. A little fiddly, and does the job its supposed to. But getting the things on was easy enough. That's where the negative stops though. I primarily use these for beatsaber, and they're great! Firstly, the material works really well in that they're good and grippy - hard to let go, easy to control. But also with the hand strap as an added layer of security means you can slacken your grip without worrying they're going to fall off. Really impressed.

I've always been a fan of AMVR products and these grips are very well made. They are one of the few that don't occlude the sensors at all, and also have a cut out for the sensor at the bottom of the grip handle. Tracking is not affected in the slightest. Fitting was easy. There is a custom battery cover which leaves the battery exposed so you can access it through a flap in the silicone cover, and it also has a locating tab to help keep the cover in position. You just fit the battery cover then slide the sleeve over the top and locate the tab on the battery door into a cutout on the sleeve. You then fit the battery over a supplied pull tab to help you remove it when needed (you also get spare tabs in the box). Then there's a flap in the cover which clicks nice and snugly over the battery. It's all very well thought out and feels good when fitted. The silicone is just the right hardness and feels nice in the hand. The straps are comfortable enough but quite firm with no stretch. Adjustment is via Velcro which is normal for these things. The straps hold tight and grip the knuckles without a problem. The silicone is quite thick and offers excellent protection (something i was grateful for after smashing them into a chair on a Bear Saber frenzy!) but it also adds thickness to the controller. This may or may not be a good thing depending on your hands. I have smallish hands and found them a bit chunky although you do get used to it after a while. The other problem with full body covers is that when the grip and trigger buttons are fully depressed they go below the level of the cover which means your fingers edges kind of catch on the rubber as you push them in. Initially this really niggled me but after a period of adjustment I didn't really notice it any more. Neither of these things are a fault with this product, just a side effect of having full body covers. It's a shame white ones weren't available as having black controllers kinda triggers my OCD but you don't see them in VR so i guess it doesn't matter. Another thing I noticed was that AMVR seem to have stopped using press studs to secure the straps to the grips. They are now riveted meaning it would be much more difficult to replace the straps down the line. Overall these are some of the best silicone covers I've seen. I would definitely recommend them.

Great grip covers for the meta 3 controllers! So comfortable, secures the controllers really well in the hands and look great! The materials feel high end, the fit is perfect & precise. It helps with the overall feel of the controllers and allows you to open your hands, completely letting go of the controllers, without dropping them thanks to the adjustable hands starps. I havnt had a single tracking issue whilst using them. I was concerned that completely removing the battery cover may make the controller not feel right in the hands, but the grip covers replacement/included covers fits in place perfectly and allow for very easy access to the battery without the need to remove the grip! Absolutely recommend! Cannot fault on any level. Also loved how the packaging matched the meta quest 3's packaging.

These silicon covers are really good and feel nice. The straps are good too. Just don't over tighten them or the rivet on the strap could dig into your hand. I just tighten it enough so the hand slips through but there's a little looseness as well (just a few mm really). That way you don't have to undo the strap.. just slip your hand through all the time. One thing I really dislike is the battery tab. It's too short and slippery as well. I find these tabs just don't have what it takes to remove the battery. These tabs haven't got what it takes to manage it really. Could do with being longer and with more grip. I think maybe a smallish tie wrap could replace it really. As long as you can thread it through the slot. Finally I thought it quite funny they give you replacement tabs. Which says to me they don't expect them to last that long anyway. Great covers with nice comfy strap but lose a star because of the poor tabs.

These AMVR grips are a game-changer for my Quest 3 controllers! The fit is snug, and the design is sleek while adding great protection. I love that they come with a battery opening—no more fussing with the cover just to change batteries! The knuckle straps are comfortable and keep the controllers securely in my hands during intense gaming sessions. Overall, it’s a solid upgrade that enhances both comfort and functionality. Worth every penny!

OK well these grips are fantastic. A perfect fit and do not seem to affect tracking. They were a little bit pricey maybe, but there have been deals, and you do get a good product for price. I think they may be cheaper on the AMVR website. The design is good, they have new battery covers to replace the Meta 3 covers and some tie tabs which you slip under the battery itself. Then the silicone sleeve goes on and has a flap acting as battery door. There is also a little hole which lines up with the batter cover to act as an anchor. All in all, a good product that I'm very happy with, as it gives me confidence when playing games like Beat Saber much more than the default wrist straps.

The Controller Grips Cover for the Quest 3 is a game-changer in the world of virtual reality. Its comfort is unparalleled, providing a sturdy grip that enhances the overall gaming experience. The ability to easily let go of the Quest 3 controllers adds a layer of convenience that is much appreciated. The Version 2 with the battery lid is a significant improvement. The ease of replacing batteries when they need charging is a godsend, eliminating any interruptions during gameplay. The design also cleverly reduces the chance of accidentally activating the grip button, a feature that many users will find beneficial. This product is what Meta should have designed and released. It’s a testament to thoughtful design and user experience, proving that sometimes, the best innovations come from understanding the user’s needs and improving upon existing designs. All in all, I am extremely satisfied with this product. It has not only met but exceeded my expectations, providing an enhanced VR experience that is both comfortable and efficient. A must-have for any Quest 3 user.

These controller straps are well-built and feel fantastic in your hands and the material is a big plus for comfort during shorter play sessions. However, after extended use, the straps leave noticeable marks on your hands but this is most likely from me having bigger hands. (See pictures) The biggest issue I had with them and what made these a no-go was the tracking problems. The straps seem to interfere with the sensors, causing them to cut out and are very noticeable when playing fast-placed games like Beat Saber as well as this the Quest 3 always thinks you are holding the controllers when you are not thus making hand tracking not possible. They are mostly a good comfort especially if you have smaller hands and if you're not doing faster movements such as playing Beat Saber then it's great, otherwise just get a standard side strap not a full cover, AMVR has one.

Good grip and hugs the hand so will not fall even if you throw your hands around

They arrived very quickly, were easy to set up and the best bit is the ease that I can access the batteries from now on. I also love the tiniest of detail with the small clip at the top near the trigger as it it holds it in place and prevents the rubber slipping and impacting on the buttons. Something that was annoying with my other grips. A great product and well worth the money.

Las mejores fundas que puedes ponerle a tus mandos, se sienten de mucha calidad, fuertes y cómodos. Encajan cómo un guante y no tapan los sensores con sus sistema de anclaje.

This one has a small plastic band that helps you get out the batteries that are very hard to get out usually. Works good for my son who is not so carful with the controllers.

Bueno, no se que le pasó a mi paquete pero resistieron un buen el castigo del repartidor, y se siente de buena calidad, y si aguantaron eso entonces valió la pena comprar esas fundas para proteger mis mandos xd