V1SW

I put these up 6 months ago and they seem to be doing what they advertise. Dissipating the heat better then stick it directly on the wall. The lights haven’t dimmed like normally would, and also no lights have died that I put on these. They also look a lot cleaner then trying to put lights up by hand and eye balling a straight line when you adhere it to the wall.

For my purpose these worked great. Cutable for perfect fit. Size fits under cabinet so it is completely hidden. They protect the light strips and install is much better than relying on just adhesive to hold the light strip up. They are a quality product for that professional finish.

Got these for my stair lights since the bare led strips was blinding my eyes. These worked perfectly since I didn't wanted the leds to point horizontally sideway or vertically down. These point at a 45 degree angle and provides just the right luminance without a blinding effect. It was also easier to attach the led strips around corners at an angle than if it was flat. These were also easy to cut and trim. I used my mitrs saw without any issue.

These Muzata V-shaped LED channels completely transformed my lighting setup. The aluminum feels solid and high-quality, and the frosted covers make the light look soft and elegant. Just a heads-up you’ll probably need tools to cut them to size, and depending on the LED strip you use, the individual LEDs might still be slightly visible. But honestly, that’s a tiny trade-off for how professional and sleek everything looks once installed. ⭐ 5 / 5 sturdy, stylish, and totally worth every cent! Perfect for anyone who wants their LED setup to look high-end.

These are what turn an LED strip into finished lighting. Run bare, a strip reads as a row of individual dots; behind the milky diffuser these become one continuous, even line with no hot spots — a much cleaner look for anything permanent. The 45° V-shape is the right profile for shelf and cabinet work since it aims the light out and down at the surface instead of straight into your eyes, and the corner mounting means the channel tucks into the joint and mostly disappears. The extrusion is solid aluminum with a clean anodized finish, not flimsy stock that flexes when you screw it down, and it doubles as a heat sink, which the strip’s lifespan appreciates. Cutting to length is easy with a miter saw and a fine-tooth blade, and the end caps and mounting clips are included rather than sold separately. One tip: dry-fit and mark your clip locations before peeling the strip adhesive, and leave yourself a plan for where the lead wire exits the channel — that’s the only part worth thinking through in advance.

Let me just start by saying this does get the job done and works as advertised. It goes in the corner of the wall nicely, diffuses the lights some, probably helps some with the heat dissipation, etc. Sadly this is not a super spectacular product and there are plenty of little things (some may be slightly nit-picky, others lack of experience) to say about them. First off, don't expect to hide the "dots" of the LEDs. At least if you use the TP Link Kasa. Now this wasn't fully advertised to be their "hide the dot" model, so I can't fully knock it for that, however the description led me to think there would be a little more of that than their really is. Next mounting to the wall. I was unable to get any of the included screws to go in without making a small starter hole, though I think something (maybe included in the sparse instructions?) gave me thought I could. Again not a huge deal and something small. Again it adds up. Also, possibly due to that, I did have some trouble with the clips and keeping everything straight and level. I also did run several of these next to each other to make the length I needed and didn't use their (separately purchased) joining kit, so I don't know if that would have made a difference or not. The included plastic end caps and diffuser were also fairly hard to get on... especially the end caps where the plastic actually did NOT fit in the end of the channel and needed to be hammered in to even go in. Also, again at least for the TP Link Kasa strips, the end cap with the hole for the cord is no where near big enough. Again, at the end of the day it does get the job done and honestly I would probably buy it again just because of that. The metal was easy to cut to length, it'd probably be easy to cut for wrapping around a corner also (vs buying their kit), and it does work. Just beware of the few issues/random things you could run into.

Easy installation.nice quality,value and looks hand by hand ,very strong and looks amazing

Nothing else comes close to doing what these do at this price point

LEDのつぶつぶ感が拡散されればと思い購入しましたが、結構つぶつぶしてますので-★1

The diffuser is difficult to west in the track. It’s a lot of money for some scrap aluminum and very thin plastic diffuser. Please it came with mounting hardware. It’s worth is about $20-30 not more

Works as advertised, easy to install, looks great. Also easy to cut using a dremmel or grinder.

Es lo que yo necesitaba, sin embargo venía mal empacado. Tuve que desechar las puntas maltratadas y rescatar el resto.

普通に使えて、コスパも良くおすすめです。