Case for Switch Oled

As said in the title, my first impression is "great case". The portion that wraps around the joy cons is super comfortable for me to hold the switch as a portable device now, and I love the game storage slots. I don't have a lot of games (physical or digital) yet, so I'm not completely sold on being able to store two microSD cards. If you have smaller cards I can absolutely see the benefit, but if you have larger cards you may not use these. I'm not sure about others having complained about power or volume; maybe there was a defect that's been corrected? Regardless, that was one of my first tests and I feel like the volume and power line up perfectly; when I push any of the 3 buttons, I get the exact result expected. I found putting the case on to be a small challenge, when the joycons were attached. My recommendation: take the joycons off the Switch to put the case on. Line everything up on bottom, "snap" the top on (it doesn't snap so much as fit snug), then insert the joycons. You'll have to be extra sure to slide the joycons down all the way, as my case is tight enough I don't easily hear the audible click when I put the joycons on now, but that's OK for me. I can still remove the joycons, although it's a bit more work because the case is snug, and I can put them back. The other complaint I recall reading is about the bottom of the case. I wish this were a bit more sturdy than it is, but I don't see a major flaw either. The minor flaw is that it's just a bit too big (wide) or may soft, as it doesn't stay snug against the bottom of my switch. Having said that, it's not causing issues either. I can still dock the switch without issue, and it's not so loose that it will somehow affect using the kickstand. Speaking of the kickstand, as the product description indicates, it remains 100% accessible. If you have trouble with this or button placement, double-check that your switch is properly aligned in the case first. As the product manual indicates, the game/sd card storage is NOT REMOVABLE. I can't see why you'd want to remove this anyway, the whole point is to conveniently carry up to four additional games as you travel, or have your four most played games right there - plus the one in the console. Overall, this case is fantastic. I looked at cases that were less expensive (they seem to range from around $10 to $25); while this is on the higher end cost-wise, it's well worth the $20ish I spent.

The KIWIHOME Dockable Case for the Nintendo Switch OLED is an impressive accessory that truly enhances the gaming experience. Here are the standout features of this case: Grip and Comfort The first thing you’ll notice is the excellent grip. The textured surface ensures that the Switch feels secure in your hands, reducing the likelihood of accidental drops. Whether you’re playing in handheld mode for extended periods or quickly switching between games, the comfort remains top-notch. Durable and Vibrant Color The color quality of this case is remarkable. Unlike other cases that tend to fade over time, the KIWIHOME Dockable Case maintains its vibrant hue even with regular use. This not only adds a touch of style to your console but also ensures it looks good as new for a long time. Docking Compatibility One of the most significant advantages of this case is its perfect docking compatibility. You can easily dock your Switch OLED without removing the case, which is a massive convenience. This feature ensures that your gaming sessions are seamless and uninterrupted. Game Cartridge Holder The game cartridge holder is another thoughtful addition. It’s designed to make adding and removing game cartridges effortless. This feature is particularly useful for gamers who like to switch between physical game copies frequently. Conclusion Overall, the KIWIHOME Dockable Case for the Nintendo Switch OLED is a fantastic investment for any Switch owner. Its superior grip, lasting color, perfect docking fit, and easy-to-use game cartridge holder make it a must-have accessory. This case combines functionality with style, enhancing the overall gaming experience. Highly recommended!

I also have the Nintendo Switch Pad Pro, which feels Ok to use but is huge, has no internal electronics (no rumble, accelerometer, gyroscope, or NFC sensor for amiibo), and could damage the switch/joy-con mechanical interface if dropped. I ultimately chose this product because it is significantly more compact, includes game storage, keeps the joy-cons (with all their functionality), allows use of the Switch's stand, and does fit into the dock without having to remove it. To dock easily, just slide parallel and straight down (if not exactly straight, just a slight wiggle should seat it into the bottom). The game storage needs to be opened >90deg when docking. Some reviewers stated that it is difficult to remove the games. That is true if you try to slide them out. I found they are fairly easy to remove if you just pry from the bottom of the game cartridge (closest to the hinge) using your fingernail as they are held in with rubber on the edges. The case has a nice solid high quality feel to it and I believe it would help protect the Switch/Joy-Cons assembly/connections if dropped (compared to the Switch Pad Pro). Important to note to follow the installation instructions and put the bottom the Switch in first, then carefully press the top into place. To remove, press the top out 1st, then pull off of the bottom. Otherwise the bottom thin plastic piece can break in two if you're not careful. Once in place, there's really no reason to remove it unless you want to place the Switch in a standard case for travel. The KIWIHOME Customer Service stands by their products (see their extended warranty).

Great !! I bought this because my other case broke , it was cheap but flimsy , this case is a pretty good price for what it offers , I am currently planning to move and fly out and I wanted something to hold my games safely and also get something that would look and feel nice !! Kickstand is perfectly functional and the grips add a softer surface to stand on . It was a little tricky to put my switch in since i didnt want to immediately break it but you just have to carefully slip in the tablet then slide the controllers in after, The grips for controllers are nice especially for larger hands, the game storage is nice as well even if I couldn't fit everything , I was also surprised to find out I could store 2 of my SD cards in there as well ! It's an automatic plus from there , I can still fit it in my Nintendo Switch carrier if I squeeze it I a bit , it's nice and compact and great if you're on the go :)

Love it. Slim, holds games (although kinda too tightly on mine be careful not to rip off the sticker on the cartridge), gives the perfect amount of extra grip for adult hands. The weak point is along the bottom (a fall broke the bottom plastic line but it still works fine without that support)

Gotta say I was impressed with this case out the gate. But it only lasted a month before it cracked byond repair, the bottom piece seems sturdy but it will crack and break over time. This is garbage, the games fit in so tight it the cartridge holer that you almost need a tool to get them out. VERY DISAPPOINTING.

Advantages: Grips feel good. Fits the console and the dock *more in Disadvantages Keeps 4 games on the console, which happens to be the amount I have (plus the one being played) Game slots are a friction fit, but if that wears down eventually, it still clasps closed against the back of the console. Disadvantages?: *Fits the dock, but not if you have the joycon charger that goes straight across the front (& plugs into the lower USB). Can be remedied though with a dremel sanding wheel, just be careful. I barely hit the corner of the circuit board, still works. The bottom of the grip contacts the charger just enough that they're not compatible without a little moddin'. Volume up button doesn't work, maybe it'll break in or I'll tinker with it. Biggest problem IMO: Games go in tight & are really tough to remove; EDIT; Just dremel the bottom edge down so you can grab the games. Carefully had to use a pen to get it started while not scratching the metal game parts. I could only remove 2 by fingernail, & it was sketch. Just not enough room to get a finger tip in there, needs more space. Easy fix if you have a dremel. Meh: Covers the kickstand (original switch) that I never use & that I really only replaced to have the memory card protected. Can always prop it up with something. Doesn't fit the standard clamshell case anymore, which is fine bc the little rectangle controller base +joycons+rubber grips didn't really fit either, & cases aren't that much. I love the Switch; All the different configurations & controllers, very innovative. And it's the most badass GameBoy you could ask for (I grew up playing Pokemon on Gameboy Color. I'm playing Arceus now & loving it though I wish it had trainer battles..) Borderlands 3 is my other favorite, then for multiplayer; Smash Bros, Mario Cart & Ninja Turtles. Overall, I like the concept integrated with the larger palm swells/grips; And it was affordable. Games just need more space for removal.

Over all exactly like pictured. Fits a Nintendo switch OLED perfectly and is hard to get the controllers out. Since this was bought for my 8 year old son the plastic on the bottom didn’t hold up well and ended up breaking after about 8 months because of how tough my 4 year old was with it. It’s not bulky and holds 4 games and 2 micro sd cards perfectly and keeps them safe and secure. If looking at purchasing for an adult I would buy again but if for a young kid I would still buy again but with the understanding that it might break depending on how rough your kids might be with it. Fits comfortably in all sized hands, easy to use, and great for the price. Plus kept his switch safe even with some drops.

Every Nintendo gamer should have this holder. It is a must! I saw it for the first time travelling from Philipeen airport to Japan and immediatly ordered it! Very happy I did!

It’s a wonderful cover. Especially that I don’t have to take it off to dock the switch. Even the botten bracket is very small near the usb-c port but it is made from a different material than the rest of the cover which makes is a bit sturdier. So it won’t break, (my former cover from spigen did broke at this point because it was made from hard material) but the quality is better than some expensive brands. Also the handles for my big hands are really great. And the power annd volume buttons react great in it. Although it also has one little flaw in my opinion, that’s is to get the games out of the holder you need some help from a pen or a spoon or something. There is just not enough room to get your bare finger in to pull it out. But overall it gets a well deserved 4 out of 5. Great build

I was considering getting a much pricier case because I wanted something that made the switch more comfortable to hold, but I'm really glad I went with this one. It reduces my hand fatigue significantly, was easy to install, and feels nicely solid. I don't have many physical game cartidges but the little holder at the back isn't obtrusive at all. The joycons come out easily without needing to remove the case, and you can still use the kickstand. Really happy with this!

Convenient, but the plastic on the bottom is too flimsy, and, although it is more comfortable than the original switch, it could have a longer extension on the side. Also, it is too expensive for what you are getting

This makes the switch way more ergonomic and comfortable to hold. It also supports the joycons and takes out the small bit of wiggle when they are docked onto the switch. The whole case is quite solid and I feel like it provides a good amount of protection for the system. Other than that, it looks good and was easy to install so I am very satisfied.