Akasa 20 Rubber Case Fans Mounts | Silicone Rubber Pins | Anti-vibration Fan Mounts | 20 pcs | 73mm | Black | For Computer Cooling Fan and PC case fan | AK-MX003

Great quality and perfect for job . made sonds pc run alot quiet .. thank you

These Akasa rubber fan mounts made a noticeable difference in my PC build. Swapped out the standard screws for these silicone pins and instantly reduced vibration noise - fans are now so much quieter. Installation was quick, and the 73mm length worked perfectly with standard case fans. The soft rubber absorbs movement without compromising stability, and the 20-pack gives plenty of coverage for multi-fan setups. Fairly sure they would be compatible with any normal screw type fan. Highly recommended if you're chasing a quieter rig without spending a fortune - a small upgrade with a big payoff

Very good anti-vibration mount, _assumed you've installed it correctly_. Most people who claimed no improvement didn't correctly install - either pulling fan against case (too tight) or not properly pulling through end pieces (too loose). Long tail makes it easy to install in very tight spaces without having to disassemble the system with some help of long-handle pliers. Then the tail could be cut - or left in place if no interference with anything for later potential re-use. The heads are relatively conspicuous and look a bit like fat screw heads. Which helps with tidy-looking install. I only wish the head had less "bulge" on it - I had to cut excess material when they've interfered with some dust filters.

Surprisingly easy to fit and a simple solution that seems to work pretty well.

These are superb. I wished I’d discovered these ages ago! I have used these to mount two 120 mm case fans at the rear of my tv cabinet to help keep my equipment cool. They are a little fiddly to fit when you first get them, but are very strong and are holding my fans in place with no discernible vibration in the cabinet. They’re lovely and quiet! I recommend watching a couple of install videos on YouTube first (on how to install and remove them). This should avoid you having to cut any. I could install them first time without any problem. The second one was a lot easier to fit once I had got the hang of these very stretchy little gems!!

I got a pack of these to install some fans in my PC case. Because of the design of the case, a Fractal Meshify 2 XL, I was getting a loud noise from the front case fans at a certain RPM. After installing these, I can now run the case fans at a higher RPM than before (1500 RPM, up from 1100 RPM), all while keeping the noise and vibration levels down. The silicone rubber pins are reusable, well-made and easy to install, I would definitely recommend getting a bag of these.

I've had issues previously when building computers that metal cases have ended up vibrating, while this can be solved for a while with a gentle tap to the offending case side, it's not ideal. Other computer builders have recommended using rubber pins rather than metal screws or adding silicon anti-vibration stickers to the case side. With these screws not costing too much I decided to try them out as a replacement to my current metal screws. I'm very glad I ended up buying them as they're so much easier to use than metal screws. Screwing in some fans was very difficult previously as the metal screws struggled to go into the rubber of the fan mount. With these mounting pins it takes just seconds to pull them through the fan and case then (once you're sure you're not removing them!) trim the mount pin's tail with scissors. Since using these I've had no problems at all with the case humming. Even without considering the humming, I think the PC may be quieter than ever, although that might just be the placebo effect. It may seem like a silly extra expense that only the guys who spent £800 on computers would go for, but as someone who values a reliable and affordable PC over LEDs and case windows I'd say this is definitely worth it. One piece of advice I'd give is not to be afraid to give the mounting pins a good tug when affixing them! Don't be super-gentle with them when trying to get the case and fan to click into place. A good strong tug on the long end gets it through and most things clicking into place.

This is not a bad product, I'm sure. My review is a warning to others hoping to fit these mounts to smaller fans like 40mm or 50mm diameter. These fans can often be relatively noisy because of their small size. Some cases only have room for such small fans and cannot be adapted to fit larger ones. For example my 2U server case. Larger fans have small holes in the corners, small enough for a metal screw to secure into, on both sides of the fan. Between the two holes there is an open gap. That is what these mounts are designed for and will work well, I'm sure. But with smaller fans, there is no gap and a single narrow hole from one side of the fan to the other. These mounts will simply not pass through those holes, the holes are too long.

La instalación es muy fácil y rápida, y he notado una gran diferencia en la vibración y el sonido de los ventiladores. Estos soportes absorben eficazmente las vibraciones, lo que resulta en un funcionamiento más silencioso. Además, su diseño es versátil y se adapta bien a diferentes tamaños de ventiladores. Me gusta que estén hechos de material duradero, lo que garantiza que aguanten bien con el tiempo. Sin duda, son una inversión recomendada para quienes buscan mejorar el silencio y la eficiencia de sus sistemas de refrigeración. ¡Gran compra!

Took me a while to find rubber mounting screws of this type. They are great , had no trouble replacing my metal screws wirh these. No breaks or snaps, a lot of reviews on rubber screws say they broke or snapped but to do that you would have to put beyond normal for on them. Highly recommend for computer enthusiasts looking to lower computer fan vibrations.

Ich habe diese Stifte gekauft, um meine sechs neuen "ENDORFY Fluctus 140 PWM"-Gehäuselüfter zu entkoppeln. Ich war vor der Bestellung etwas skeptisch, da mein "NZXT H7 Flow"-Gehäuse diese länglichen Schlitze für die Lüfterbefestigung hat. Die Sorge, dass die Lüfter mit den Stiften in den Schlitzen hin- und herrutschen könnten, haben sich glücklicherweise als unbegründet dargestellt. Im Gegenteil: Die Stifte sitzen bombenfest (selbst bei OC-Tests mit 100% PWM-Speed hauen die Lüfter nicht ab). Dabei geht die Installation sehr einfach und problemlos vonstatten: Den Lüfter vor die Gehäuselöcher, bzw. Schlitze, halten und die Stifte von hinten duch die Gehäusewand und die Löcher der Lüfter ziehen. Man merkt dann bei weiterem Ziehen wie es erst an der Gehäusewand und dann an der vorderen Lüfterseite "ploppt". Den überstehenden "Schniepel" kann man dann einfach mit einer Schere kürzen, wenn man möchte. Während der Installation ist kein einziger Stift (24 Stück in meinem Fall) gerissen. Die Stifte kleben nicht und weisen generell eine sehr gute Verarbeitung auf. Und das für diesen günstigen Preis. Wie wohl herauszulesen ist bin ich total begeistert und zufrieden mit den kleinen Kerlchen. Daher eine klare Empfehlung! :-)

Om de ventilatoren zo goed mogelijk te ontkoppelen kunnen deze rubberen montage stiften worden gebruikt om de PC stiller te maken. Bij de montage is het van belang om de handleiding even goed door te nemen. Wanneer je bij de montage te hard aan het rubber trekt kan deze breken, dus dat is wel even opletten.

day and night dfference after installing tese