UniBond Sealant Remover

I used this before resealing around a bath, and it made a horrible job much more manageable. It softened the old silicone enough that scraping it away was far easier than trying to attack it dry. You still need patience and a decent scraper, but it definitely helps. The tube is not huge, so bigger jobs may need more than one, but for normal bathroom work it is very effective.

This works really well as long as you spend time getting the majority of the sealant off beforehand using a scraper or blade. Once you've done this it is great for removing any residue. Note there isn't much of the stuff - there was enough to do two sides of my shower tray with a bit left over. I reckon there's enough to go down a short and long edge of a bath. I'm giving 4 stars because they don't make it obvious that you'll need to do a lot of work scraping before you can use this effectively.

A must-have for any sealant job! I was dreading the tedious task of removing old, stubborn silicone, but this product made it incredibly easy. The gel formula softened the hardened sealant in about 3 hours, allowing me to scrape it away cleanly without any fuss or damage to my tiles. It saved me so much time and effort, leaving a perfectly prepped surface for the new sealant. Highly recommend!

It wasn't easy to apply. It comes out as a jelly which just moves around instead of sitting on top of the sealant. A thick paint would be easier to apply. It probably did help remove sealant but brute force did most of the job.

Excellent product. Bit more expensive than other products but well worth the extra and goes further than one anticipates. Used to remove silicon off various places in bathroom following a refit.

Good but i had to use WD40 as well with it on a concrete wall with pebble dash, very difficult,somebody had filled the cracks with silicone sealant and paint came off the sealand

I was removing old, horrible silicone sealant from around the lid of a top-loading boat fridge. It was a really yucky, horrible job, and the old sealant was hard, dried-up and with all sorts of embedded gunk and mess (previous owners' gunk and mess, to make it even worse, not ours). I was getting fed up with scraping at the old sealant despite having a good scraper tool that worked well, so I decided to give this product a try. It's true that it is 'thick gel', which means it does not run. But it also means it's a little hard to spread, although it's perfectly do-able, albeit a little messy. Better that than a runny product though, as it does not end up going everywhere. I left it on for a bit longer than it says on the instruction and it made it so much easier to get it off with a scraper tool. It also ended up cleaning the stains (rust stains?) around the lid, which was an unexpected bonus. It did not stink as much as I was expecting it to, either. Overall, it worked well. I needed a bit of patience to allow enough time for it to work, but I'm very happy with the result. I recommend that you make sure to wipe it off properly before applying the new sealant, or it may not stick as well as it should.

I was having a helluva job trying to remove some very old sealant from my raised patterned bathroom tiles. After having a new shower door fitted; the new door was quite a bit thinner than the old door, leaving the old sealant clearly visible on the tiles inside my shower cubicle. I decided to search for a Silicone Sealant Remover and found this Unibond one, with excellent reviews, and I’m so glad I did! This clear gel smells of strong bleach, but was very easy to apply and, as the sealant was so old, I decided to leave it on overnight. The following morning, the gel had expanded and solidified over the sealant, so I put on some disposable gloves and gently scraped off the gel, then wiped the tiles over thoroughly with a warm wet cloth and ‘hey presto’ they were like new again. Best and easiest product to use and remove and also great value for money. I would definitely recommend this to anyone!

Worked perfectly