Phobya NanoGrease Extreme High Performance Thermal Compound 3.5g

I was experiencing some significant thermal issues with an MSI GE76 Raider with an 11800H CPU. After under-volting and still having issues, I tried re-pasting with some MX-6 but it did nothing to help. Ultimately, to stop the thermal throttling I had to limit core boost frequencies by 800mhz. I essentially gave up trying to get the temps under control and assumed this was the price we laptop gamers had to pay due to the never-ending quest for smaller lighter gaming laptops. After several more months of high core temp differences and the occasional unexplained crash, I decided to do some additional research when I ran across an article regarding this thermal paste. This stuff was given a glowing review especially for people experiencing thermal throttling and high core temp differences in gaming laptops. The viscosity of this paste seems to be the magic bullet as gaming laptops are susceptible to uneven heat sinks and uneven heat sink pressure. I'm happy to say after using this thermal paste the majority of my issues have been resolved. Core temps are much more even across the board, and I've been able to reduce the manual turbo limit by 400mhz while still maintaining max CPU temps of 83c. Furthermore, the GPU (which I haven't limited in anyway) hasn't gotten above 55c. These temps are holding steady with the stock automatic fan curve so there is some wiggle room as to how much more I can remove from the manual boost clock limitations. If you're experiencing the same issues, I highly recommend giving this paste a shot. It worked wonders for me and has made me very happy with my new gaming laptop!

I had 2 year old crusty, low quality, improperly applied corsair thermal paste on my pc. Then i used this and applied it properly(the spreading butter method) and my temps went from 90C to 75C with a multi thread cinebench. I have an i5-10600K cpu. I also use this on laptops and it works well. Very sticky, which is desirable. Easy to clean up

I have an Alienware X17 R1, and repasting with Phobya NanoGrease Extreme saved the day for me. The original heatsink in my laptop couldn’t be worse fitting. There was very light contact between die and heatsink and the “element 31” paste that Dell used almost completely pumped out all around the CPU die. The little paste that did remain between the die and heat sink Dell was 100% dry and burnt out, and was literally etched onto the copper heatsink side. It was a disaster of a pasting job by Dell’s robots. I scraped off as much of the old 31 I could and applied a nice thick layer of Phobya as a replacement. Results have been great. All thermal throttling has been removed and my CPU temps have remained within acceptable range and rock steady for the past 3 weeks so far. Phobya seems to be a great match for poor fitting heatsinks because it is so viscous and requires a spreader to apply. In any event Phobya NanoGrease Extreme will get me by until I can get Dell to send me a quality heatsink replacement. Until then I’m good. 5 stars for this paste!

Well, i ordered the NanoGrease E. and I got the HeGrease E. ...... in the end its all good as most reviews put the HeGrease higher then Nano, specially for laptop warped heatsinks. To bad i payd 50% for the Nano, but a return would keep my laptop grounded another week or more.

Great paste for small dies or IHS's as it's pretty difficult to spread, the included spatula helps with this. If you have a large IHS to cover like 2066 or TR I recommend HY P13 paste which is rated at 13.4w/mk. Nanogrease helped knock off around 8c, off a 1660Ti for me. The paste has a really thick viscosity almost dough like.

I have an old laptop with 7700h and gtx 1070. The temps always felt high since I got the laptop. I saw a youtber recommend this paste and he was right. It dropped my temps easily. Doesn't thermal throttle anymore. Very happy and would recommend this paste.

This is by far the best thermal paste iv ever used. Iv recently went on a shopping spree for numerous thermal pastes. Have used IC Diamond for a year now, tried thermal grizzly and all the usual suspects. this blows them all out the water. 29c Idle and 69c Load ON AIR! Keep in mind we are talking about a laptop with fans on auto not max. this is some serious stuff!

Well I used this to replace some old white silicone grease on one of my IC chips on my guitar amp, I figured a fresh thermal grease was gonna be a good thing. Turns out that it is electrically conductive and where the grease touched the screw the grease had been burnt black. It blew up the Integrated Chips for my guitar amplifier so I had to order new ones. I had to order white silicone grease and I’m never using this ever again. It is definitely electrically conductive no matter what they say.

I bought this to do a CPU and GPU repaste in my Alienware M15 laptop. Results seem positive. I have increased my 3D Mark and PC Mark scores and the laptop appears to be running cooler too. Very easy to apply the paste and there's an applicator for those that need it.

La meilleure pâte thermique existante à ce jour. Elle est devant (de peu) la Kryonaut et largement devant la Gelid. PS: la meilleure pâte en tant que graisse, les pâtes type métal liquid sont un autre domaine. Prendre bien soin de refermer le tube à fond car elle a tendance à sécher un poil sinon.

Ottima pasta, solo un pò complicata da applicare

Genial por ahora. Estoy testeando aún con varios coolers pero rinde con la temperatura ideal 22/25º. No me ha importado para nada el precio, porque para ser sólo 3.5 gramos, 16 euros.. pero bueno, la cuestión es que es una de las dos mejores pastas térmicas y es lo que hay. Nadie regala absolutamente nada en el mercado de componentes informáticos, y hay que pagar si no quieres seguir teniendo altas temperaturas o al poco tiempo andar cambiando de nuevo la pasta porque te ha salido una porquería. La recomiendo al 100% al igual que la recomiendan las páginas especializadas en modding y overlock. Dejad la Artic y demás basura que no rinden ni a la mitad. Llevo años con ésta marca y no piendo comprar otra. Phobya, y lo demás es tirar el dinero.

Die Paste hat tatsächlich hervorragende Werte und stellt die hochgelobten Pasten von Grizzly locker in den Schatten. Allerdings ist die Phobya NanoGrease Extreme etwas zäh und daher ähnlich der Kyronaut von Grizzly, auch etwas schwieriger in der Verarbeitung. Wenn man weiß was man macht, dann ist das Ergebnis entsprechend gut! Wenn man die Paste in einer Tasse mit kochend heißem Wasser für 2-3 Minute aufwärmt und auch die CPU mit einem Föhn etwas erwärmt, dann geht die Verarbeitung sehr gut von der Hand und die Paste lässt sich schön dünn und gleichmäßig auftragen. Ich habe die Spritze in einen Finger eines Gummihandschuhs in die Tasse gehangen, da das Etikett aus Papier besteht und sonst aufweicht. So aufgetragen ist das Ergebnis wirklich perfekt und meinen Geheimtipp solltet ihr auf jeden Fall nutzen. Ich habe einige Pasten der höheren Preisklasse getestet und tatsächlich ist diese Sorte auf platz 1. Platz 2 ist die TF8 und auf dem dritten Platz kommt Kyronaut. Der Preis ist völlig in Ordnung, denn mit einer 3,5g Tube kann man einige CPU bearbeiten.