Puig 9462F Winds. New Generation Honda Rebel 500 17-25/ Rebel 300 17-23/ Rebel SE 20-25 C/Dark Smoke

Fits well. Had to do a little tweaking to brackets to fit since I have the headlight cowling but easily made it work. Looks good and isn’t too big but provides the right amount of wind protection. I can easily do 80+ mph for extended periods and have no wind pull on my chest. Before if I hit over 80 I could only do it for short spurts without wanting to back it down to 60ish. Was on the fence because I think they take away from the look of a bike but after having it on I wouldn’t rode without now. 💯 worth it.

I had the Honda OEM meter visor, and that kinda worked but I felt like I needed more for higher speeds. This one works pretty well. The install was easy -- easier than the OEM meter visor. The only thing you need is a No. 8 Allen wrench, which is pretty big, in order to remove the stock bolts. It took about 15-20 minutes for me to put it on. And the windshield works pretty well. At above 60 mph, the wind pressue on the body was reduced a lot, and there was only a tiny bit of wind buffetting at the top of my helmet (I'm 5'5"). I recommend this windshield!

I installed it on my 2023 Honda Rebel 500 ABS SE. According to Amazon's description this windscreen should not fit my bike. Not only does it fit just fine but it also can be mounted with the headlight cowl still on. You need to do some minor adjustment to the bracket but it takes no additional tools and is very easy with patience. I did not like the rubber back plate used to attach the windscreen to the brackets. They are cheaply made and popped out twice while riding from the wind vibration. I replaced them with lock nuts and nylon washers. Now there is zero vibration and the windscreen is much more secure.

Perfect height for me. I'm 5'4" and in my normal riding position the wind hits the top 1/3 of my helmet and slides off, taking most of the bugs with it. Any taller and the wind would hit me in the face. I pull my face shield down a little bit, so it's not over my eyes, and most of the wind goes over my head. It was easy to install and the light smoke looks great. (they did send me the wrong windshield the first time around but that was Amazon shipping's fault. I just returned it and NH ordered it again and the second time they got it right.)

Very satisfied and fit perfectly for my 2019 cmx500, glad I bought it, protect against wind to the body and I like the way it looks

Windshield and brackets are good quality. Hardware is garbage. Screws strip out easily because they are set too shallow. I ended up replacing the bracket-to-triple tree screws with hardware from Tractor Supply. Also ended up partially stripping one of the windshield-to-bracket screws but managed to make it work. Company never responded to my request for new hardware. If you have a problem, my advice is just ship it back to Amazon. (Edit) Okay, so today was my first test ride with this windshield. DISAPPOINTED! Rather than deflecting the air over my helmet, it deflected air from my chest…that was it! I went home, removed the windshield, and retested. Both times, I tested it at 30 and 60 mph. In all cases, it felt like the air on my face was the same with or without. I am 5’8” BTW. Now trying to decide if the little bit of air deflection is worth it. Finally, Windshield DOES buffet in the wind. Not real bad, but enough so that the edges of the plastic blur.

I'm 5'9, and replaced the original handlebars on my Honda Rebel 500 with ones a little higher and further back, so my posture feels more upright/laid back. The windshield was easy to install and reduced the wind on my body and chest significantly. I usually don't go faster than 65 mph but going 70 - 75 with this was easy. And it looks good (I feel like some fairings/windscreens make the bike look goofy). HOWEVER, the buffeting on my helmet was borderline nauseating. Even tried tightening my helmet as much as I could but it was just too much. It's not adjustable, as the mounts are fixed at an angle for the screws on the bars, so you can't really change the angle. It was a particularly windy day I tried it, but even before on windy days it didn't rattle my head like this. The diverted wind seemed to hit right at eye level for me. If it wasn't for this I would say it was a success for me but I just can't ride like that. UPDATE: I cut it down so the diverted air is lower and now it works great. Clean hits my helmet like it normally would and is diverted from my chest and body. Riding on the highway is more pleasant. Looks good too. Wind around my helmet is slightly louder but earplugs are a good idea anyway.

Easy installation. I have a SE model of the Rebel. I had to remove the decorative cowl around the headlight to get the shield to fit, but it was worth it. Keeps the wind off my chest which was considerable at higher speeds.

Easy and quick mounting 10 min install. Relieves wind pressure from chest area and lower helmet during long and fast rides. Can get a little stuffy during hot summer days.

Molto bello vibra un po' nelle alte velocità, ma c'è da dire che la Honda custom non prevede parabrezza di alcun genere, ho dovuto alzare il gruppo strumenti, ed il risultato è ottimo.

Es de buena calidad, los soportes también , pero como mi moto tiene protección del faro se tienen que hacer unas modificaciones al soporte . Y yo que soy de baja estatura el aire se va directo a mi casco con mucho aire se va sosteniendo la cabeza y es cansado . Pero el producto es bueno

Sehr gut. das wichtigste- ABE ist im Lieferumfang dabei

We installed this in my Honda CMX1100 without any issues. Secure firmest and does provide a good amount of wind deflection from the chest. Also looks good.