Headlight Fits Camry

PERECT FIT

Fit was not perfect but it was really close. I've sanded and polished out the old ones on several cars. I've used Meguires headlamp spray and another clear spray. They look great for a month, then back to haze and polishing, and repolishing every month. No more, that does not last. So, I replaced 3 cars headlamps so far. Cars look like new. Really nice now and I won't need to be repolishing every other month. I won't be polishing headlamps ever again.

Fit my 2014 Camry LE almost perfectly (minus some uneven gaps between the body panels only by a couple mm),and these things look great. The silicone sealing is a great factor as well, given that my old headlamps got moisture in them.The lenses are clear as can be, very happy with the purchase

The headlight lens seems fairly well built, however one of mine has an issue which I hope doesn't affect the light beam. the top adjuster that moves it side to side is loose in the housing. Don't know how to alleviate that. But it will work for now. the real issue with this set is the side marker/blinker housings. They seem so cheaply made. The tab that mounts it to the frame is flimsy. And the seal between the back and the clear lens looks like it isn't sealed all the way. A good rain shower will tell. The last thing is the headlight part has a slot for the side marker to lock into which needed to be trimmed out for the tab to fully seat. Not a big deal but poor quality control. As I didn't pay a lot for these I only took off one star.Please read!!!! ----> You need to coat these lenses with a good quality headlight coating. These are cheaply made and will yellow or start cracking within a year. This has happened with other cheap made lenses I have purchased. YOU HAVE BEEN WARNED.

Es muy bueno y me yego antes de lo que yo esperaba y le que quedo exacto al carro

The headlights make my car look new. I have a 2011 Camry and I got these because they were the cheapest I could find. Installation was easy and part fits. What more can you want?

Installed on 2005 Camry LE, replacing OEM.The plastic housing of the assembly itself is extremely thin and soft, being easily bent/stretched/smushed/cut away.The "gasket" lining around the lens is only set in place by thin sticky foam and was applied lopsided on both lenses, with a large gap on one side shown in pic.The lens appears to have some sort of clear-coat applied to it as shown in pic, but was done so very unevenly/sloppily so it looks spotty - recommend buff/polish it off and apply your own.Dimensions of the product are roughly a 1/2 inch smaller across the board (to save 5 cents on production I imagine) so this makes it difficult/impossible to align some holes when installing.Since it's smaller, once installed there will be a 1/4-1/2 inch gap between the edges of the lens and car body, as shown in 2 pics - buy gasket material or silicone to help seal this hole.The top mounting bracket is also short, so notice how the angle on it is made about a 1/2" before meeting the car body - the soft plastic can be mushed into place.The dimensions of the lens seems to be the only part that is OEM similar."It fits!" is a pretty strong term for the voodoo the customer must perform to make these usable.While my original assemblies were in bad shape, I will be saving them since I do not expect these to survive more than a couple years max.It's $90 for a pair, you get what you pay for so unless you're desperate look elsewhere.EDIT:After some evening driving it was very clear that the reflectors in the headlights are not manufactured with any amount of beamforming to direct the light level, see pic. As this kind of light dispersion isn't something that can be simply adjusted up or down to a normal level, these can't be used at night without blinding other drivers. So at the time of this edit I will be returning this failed product.

Good is originally fit good