Orion Motor Tech Wheel Bearing Puller Tool Set for Front Wheel Drive Bearing Removal & Installation, 24pc Automotive Bearing Press Kit with Sliding Screws Universal Bushings Sleeves Storage Case, Red

Bought this after reading through the reviews of a few puller kits, and as this one seemed to have the best ratio of positive to negative experiences, I decided to give it a go. Needed to press out a 97mm rear bearing on a Mercedes Vito van, so the kit had its work cut out for it! On first look, the quality of the pieces was surprisingly decent for the price…well finished, and nicely packaged. In use, the component pieces worked very well and were sufficiently robust to do the job…couple of turns with a long breaker bar got the bearing moving, and then wound it out the rest of the way with a long handled ratchet. Everything worked exactly as it should, with no issues apart from the washers being a little soft as others have mentioned…although despite being a bit marred from the nut, they would go again fine! As far as the main bolt thread quality is concerned, there isn’t a mark on it and all the threads are still perfect so I would be willing to bet the bad reviews of this component are down to the user ignoring the clear instructions to not use an impact gun…user error basically! Using hand tools as directed, it’s more than up to the task! For a home DIY spanner monkey, I’d happily recommend this set to anyone considering it…it’s a fraction of the price of a ‘professional’ version, but performs its task very well. 5 stars

I viewed changing the front wheel bearing on my Suzuki Swift with trepidation. The bearing had been in its housing for seventeen years and like most casual mechanics, I haven't access to a press.....the obvious tool for removing and fitting a new bearing. Therefore this was the reason for purchasing this kit. The kit comes in its own moulded plastic case and is quite heavy. There are many different sizes of collars and drive plates. The threaded spigot is substantial and the elongated nut requires a large spanner (not included) to pull or press the bearing into place. It's quite straightforward to use and good value for money for what you get. The only downside to its purchase is how many times does one change a wheel bearing? Whatever, I certainly couldn't have done the job without it.

The item worked perfectly to insert the new wheel bearing into both the knuckle and the axle hub. Ensure you grease everything before using the bearing puller to make the task as smooth as possible. I did not try the set to remove the wheel bearing because the circlip was absolutely impossible to remove, so I had to buy a new wheel knuckle, but the item looks very robust and not only a single-use tool set :) Read the instructions in order to set the plates properly; otherwise you might damage the new wheel bearing.

For this price it’s so handy, used it twice, did a great job

Great quality item well packaged arrived early would definitely recommend

Needed to press out 2 very old bearings and press in new ones and hub. Never quite know how a purchase will turn out. This press was insanely good. Literally earned its money on the first bearing. Second one was a bonus. Very easy to use. Lots of sleeves and plates to choose from. Honestly blew my mind how well this worked.

The 4 sleeves included in the bearing puller need to be made of thicker metal. The thin walls make it difficult to centre and slides about under pressure, also the 2 threaded bars need to made of more substantial matal the threads on the bar were all ready showing signs of of giving up after only one use

Very good

Durable

I got this as I needed to replace my wheel bearings on my ATV. After reading some of the bad reviews I was very skeptical on this product but figured I would give it a try. Boy was I glad I did. This made removing and installing the wheel bearings so easy. This worked like a charm. Now it may be the way I'm using it but the only issue I am having or had was once I started installing the bearing and making sure it was going in straight it would seem to go off angle just a bit. Enough to know that the tightening of the bolt became harder so I would stop, remove and start again. Again this was probably something I was doing wrong. Overall the whole package seems very sturdy and well constructed. I would recommend.

Bonne qualité

Perfect tool for the job! I could not be happier! Well built and very heavy duty! Used it on a Toyota Sienna and it worked very well for the wheel bearing and the spindle (part with wheel studs). Very impressed!

للاسف ماتحملت الصامولة الدريل